|
Product Details:
Payment & Shipping Terms:
|
| NE40: | LPUI-480 |
|---|
|
Attribute |
Description |
|---|---|
| Board name silkscreen |
LPUI-480 |
| Description | 2-Port 100GBase-CFP2 + 24-Port 10GBase LAN/WAN-SFP+ Integrated Line Processing Unit (LPUI-480) |
| BOM | 03057847 |
| Model | CR5DE2NLFX74 |
|
Product |
Minimum Version Requirement |
|---|---|
| NE40E-X8A | V800R010C00 |
| NE40E-X16A | V800R010C00 |
Panel
|
Name |
Description |
|---|---|
| OFL | Board removal button. To remove a board, hold down the OFL button for about 6s until the OFL indicator turns on, and then remove the board. |
| Breakout | When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling. |
|
Name |
Description |
|---|---|
| OFL (red) | If the indicator is steady on, the board can be removed. |
|
L/A (green) 0 to 23 (green) |
If the indicator is steady on, the link is Up. If this indicator blinks, data is being transmitted or received. If the indicator is off, the link is Down. |
| RUN (green) | If the indicator blinks once every 2s (0.5 Hz), the system is running properly. If the indicator blinks twice every second (2 Hz), the board is starting and has not completed registration. |
| 0 to 9 100GE Breakout (green) |
Breakout 0-9: breakout indicator. If breakout indicator X is on, the interface indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, interface indicators are showing the running status of breakout channel 0 (if an interface indicator is blinking, breakout channel 0 on this interface is receiving and transmitting data); if breakout indicator 1 is on, interface indicators are showing the running status of breakout channel 1. If the board has breakout interfaces, each breakout indicator for channels 0 to 9 turns on for 5s in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each interface, press the Breakout button to have breakout indicator 1 turns on. |
|
Interface Name |
Interface Type |
Connector Type |
Description |
Cable |
|---|---|---|---|---|
| 0/0 to 0/1 | 10G LAN/WAN or 100GE | CFP2 | Interface for inputting and outputting 10G LAN/WAN or 100GE optical signals | Optical fiber |
| 1/0 to 1/23 | 10G LAN/WAN | SFP+ | Interface for inputting and outputting 10G LAN/WAN optical signals | Optical fiber |
|
Functions and Features |
Remarks |
|---|---|
| Line-Rate capability | Supports 480G line-rate forwarding. It provides two 100G interfaces, and twenty-four 10GE interfaces. |
| Whether interface splitting is supported |
Yes To enable interface splitting, run the port split command to complete interface splitting configuration. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | The interfaces working in WAN mode can function only as master interfaces. |
|
Attribute |
Description |
|---|---|
| Optical type supported |
10Gbps SFP+ CWDM optical module 10Gbps SFP+ BIDI optical module 10Gbps SFP+ DWDM optical module NOTE:
When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported. Modules with the BOM number 02312AXE are not supported |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
|
Item |
Specification |
|---|---|
| Dimensions (H x W x D) | 40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x 21.09 in.) |
| Typical power consumption | 472.2 W |
| Typical heat dissipation | 1532.0 BTU/hour |
| Weight | 10.0 kg (22.05 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F) |
SEEKER(SEEKER TELECOM (CHINA) CO., LIMITED)
Email:tac2@gzseeker.com
SKYPE:gzseeker2011
